UPGRADE CRACKFIX

• Repairing cracks in RCC surfaces.
• Filling cracks in plastered walls.
• Repairing masonry wall cracks.
• Suitable for balconies, toilets, and building facades.
• Vertical and horizontal crack repair applications.

• Product Type: Ready-to-Use Crack Filling Powder
• Appearance: White Powder
• Chemical Base: Polymer Modified Cementitious Mortar
• Bulk Density @ 25°C: 0.85 g/cm³
• Mixing Ratio: Water : Powder = 0.35 : 1 by Weight
• Coverage: 1 kg covers approximately 30–40 meters of crack length (6 mm × 6 mm V-groove)
• Consumption: Approximately 1.8 kg/m² as dry shake
• Workable Time: Approximately 20–30 Minutes at 30°C
• Suitable Crack Width: Up to 5 mm for non-moving cracks
• Shelf Life: 6 Months
• Storage Temperature: +5°C to +30°C

Step 1: Ensure the surface is clean, sound, dry, and free from grease, dust, loose particles, paint, and laitance.

Step 2: Open the crack into a ‘V’ shaped groove. Hairline cracks should be widened to at least 1 mm for easier application.

Step 3: Clean the prepared groove and sprinkle water to remove loose particles.

Step 4: Add 300–360 grams of clean water for every 1 kg of UPGRADE CRACKFIX powder.

Step 5: Slowly add the powder into the water while stirring continuously. Mix for 2–3 minutes until a smooth paste is obtained.

Step 6: Apply the prepared paste into the crack using a suitable trowel.

Step 7: Press the material firmly into the groove and finish the surface as required.

Step 8: Allow the repaired area to cure naturally. Use the mixed material within 20–30 minutes for best performance.

Upgrade Enterprises Private Limited
Plot Nos. SA-31, 32, 40 & 41,
Cuncolim Industrial Estate,
Cuncolim, Salcete, South Goa,
Goa – 403703, India.