UPGRADE HARDFIX

• Outstanding mechanical strength and durability.
• Excellent adhesion to concrete, metal, wood, and natural stone.
• Good resistance to chemicals and harsh environments.
• Fast setting time for quicker project completion.
• Suitable for multiple construction and repair applications.

• Anchoring grout for reinforcing steel.
• Bonding prefabricated concrete elements.
• Fixing external marble and granite panels.
• Bonding segmental bridge components.
• Repairing cracks in concrete structures.

• Product Type: High-Performance Epoxy Adhesive
• Appearance (Part A): Light Brown Paste
• Appearance (Part B): Black Paste
• Mixed Appearance: Grey Paste
• Mixing Ratio: Part A : Part B = 2 : 1 (by weight)
• Pot Life at 30°C: 15–20 minutes
• Cure Time: 24 hours
• Density (Part A): 1.5 – 1.7 g/cm³
• Density (Part B): 1.3 – 1.5 g/cm³
• Mixed Density: 1.1 – 1.4 g/cm³
• Shore D Hardness: 80 – 90
• Chemical Resistance: Resistant to lime water, sea water, and salt solutions.

Step 1: Ensure the substrate is dry and has moisture content below 0.5%.

Step 2: Remove dust, loose particles, oil, grease, and contaminants from the surface. Clean thoroughly and allow it to dry.

Step 3: Stir Part A and Part B separately until both components become consistent.

Step 4: Mix Part A and Part B in a 2:1 ratio by weight.

Step 5: Continue mixing until a uniform grey colour is achieved.

Step 6: Apply the mixed adhesive in thin layers using a spatula or suitable application tool.

Step 7: Apply the adhesive on both joining surfaces for optimum bonding.

Step 8: Allow the adhesive to cure for approximately 24 hours before putting the bonded area into service.

Upgrade Enterprises Private Limited
Plot Nos. SA-31, 32, 40 & 41,
Cuncolim Industrial Estate,
Cuncolim, Salcete, South Goa,
Goa – 403703, India