UPGRADE KRYSTAL KLEAR

. Crystal-clear, water-transparent finish.

. Excellent mechanical strength and durability.

. Low-yellowing formulation for long-lasting clarity.

. Solvent-free and odourless composition.

. Suitable for a wide range of decorative and casting applications.

. Surfboard lamination and protective coating.

. Crystal-clear epoxy table tops.

. Decorative resin frames and art pieces.

. Transparent casting and encapsulation projects.

. Interior decorative epoxy applications.

. Product Type: Modified Water Clear Epoxy System.

. Appearance Part A: Clear viscous liquid.

. Appearance Part B: Water clear liquid.

. Mixed Appearance: Water clear liquid.

. Mixing Ratio (A:B): 1 : 0.3 by weight.

. Density Part A: 1.00 – 1.20 g/cm³.

. Density Part B: 0.95 – 1.00 g/cm³.

. Viscosity Part A: 500 – 600 cPs.

. Viscosity Part B: 50 – 60 cPs.

. Pot Life: 100 – 120 minutes at 30°C.

. Cure Time: 24 hours.

. Consumption: 0.300 – 0.400 kg/m² per coat.

. Maximum Layer Thickness: Up to 100 mm.

. Recommended Moisture Content: Less than 0.5%.

Step 1: Ensure the substrate is clean, sound, and free from dust, grease, oil, paint, and loose particles.

Step 2: For concrete surfaces, remove laitance using mechanical preparation or high-pressure water cleaning and repair any damaged areas.

Step 3: Stir Part A and Part B separately to achieve uniform consistency.

Step 4: Mix Part A and Part B thoroughly in the ratio of 1 : 0.3 by weight until a uniform clear mixture is obtained.

Step 5: Apply the mixed material using a brush or roller depending on the application requirement.

Step 6: Maintain substrate moisture content below 0.5% before application.

Step 7: If additional coats are required, apply the next coat after 2 hours but within 24 hours.

Step 8: Allow the coating to cure for approximately 24 hours before service.

Upgrade Enterprises Private Limited
Plot Nos. SA-31, 32, 40 & 41,
Cuncolim Industrial Estate,
Cuncolim, Salcete, South Goa,
Goa – 403703, India.