UPGRADE RAINO

. Excellent crack-bridging capability up to 2 mm.
. Flexible membrane that accommodates structural movement.
. Resistant to UV rays, weathering, algae, and fungi growth.
. Allows water vapour permeability while preventing water penetration.
. Strong adhesion to concrete, brickwork, and masonry substrates.

. Waterproofing of exposed roof slabs.
. Protection of flat and sloped terraces.
. Impervious coating for concrete structures.
. Protective coating for infrastructure projects in non-traffic areas.
. Waterproofing of brickwork, asbestos cement sheets, and corrugated roofing.

Appearance: White coloured viscous liquid.
. Chemical Base: Acrylic polymer dispersion.
. Viscosity @ 25°C: 6000 ± 100 cPs.
. Density @ 25°C: 1.400 ± 0.05 g/cm³.
. Solid Content: 65 ± 5%.
. Bond Strength: 1.5 N/mm².
. Crack Bridging Ability: 2 mm.
. Workable Time @ 27°C: 15 minutes.
. Tack-Free Time @ 27°C: 25 minutes.
. Water Permeability: Passes IS 2645.
. Salt Spray Resistance: Passes.
. Solar Reflective Index: 105.
. Layer Thickness: Approximately 200 microns.
. Overcoating Time: Minimum 6 hours and maximum 24 hours at 30°C.
. Shelf Life: 12 months when stored in unopened packaging.

Step 1: Ensure the substrate is sound, clean, dry, and free from grease, oil, dust, loose particles, old coatings, and contaminants.

Step 2: Remove all loose materials, glaze, varnish, and weak coatings mechanically to create a strong bonding surface.

Step 3: Prepare the primer by diluting UPGRADE RAINO with clean water in a 1:1 ratio.

Step 4: Apply the primer using a brush, sponge roller, or airless spray and allow it to penetrate the surface.

Step 5: Within 45 minutes of priming, apply the first coat of UPGRADE RAINO evenly over the surface.

Step 6: While the first coat is still tacky, embed glass fibre mesh reinforcement over the entire area.

Step 7: Allow the first coat to dry and apply the second coat uniformly over the reinforced surface.

Step 8: Apply a third coat after an interval of approximately 24 hours to achieve complete waterproofing protection.

Step 9: Allow the membrane to cure properly before exposing it to service conditions.

Step 10: Clean all tools and equipment immediately with clean water after use.

Upgrade Enterprises Private Limited
Plot Nos. SA-31, 32, 40 & 41,
Cuncolim Industrial Estate,
Cuncolim, Salcete, South Goa,
Goa – 403703, India.