UPGRADE SBR

• Waterproofing and bonding applications.
• Concrete repair and rehabilitation works.
• Floor screeds and patch repair mortars.
• Tile fixing and masonry mortars.
• Bridge decks, highways, parking areas, and reconstruction projects.

• Product Type: SBR-Based Multipurpose Polymer
• Appearance: Milky White Liquid
• Chemical Base: Styrene Butadiene Rubber Emulsion
• Solid Content: 38 ± 1%
• Specific Gravity @ 25°C: 1.025 ± 0.005
• pH Value: 7 – 9
• Tensile Adhesion Strength: 0.75 N/mm²
• Fully Soluble in Water
• Shelf Life: 12 Months
• Storage Temperature: +5°C to +30°C
• Suitable for Waterproofing, Bonding, Repair Mortars, Screeds, and Injection Grouts.

Step 1: Clean the surface thoroughly and remove dust, grease, oil, paint, loose particles, and contaminants. Ensure the substrate is sound and dry.

Step 2: Pre-saturate cementitious substrates with clean water and allow them to become surface dry before application.

Step 3: Dilute UPGRADE SBR with water according to the recommended mixing ratio for the intended application.

Step 4: Add the diluted UPGRADE SBR mixture to cement, mortar, concrete, or grout and mix thoroughly until a uniform consistency is achieved.

Step 5: For waterproofing and bonding applications, add cement into the polymer mixture and mix until a smooth slurry is formed.

Step 6: Apply the prepared mixture using a brush, trowel, or appropriate application tool depending on the application.

Step 7: For waterproofing, apply two coats with an interval of approximately 4–6 hours between coats.

Step 8: Allow the material to cure properly before applying subsequent layers, screeds, or finishing systems.

Upgrade Enterprises Private Limited
Plot Nos. SA-31, 32, 40 & 41,
Cuncolim Industrial Estate,
Cuncolim, Salcete, South Goa,
Goa – 403703, India.