UPGRADE SupraPhobic

• Excellent water-repellent protection against moisture penetration.
• Prevents ingress of water-borne chlorides and sulphates.
• Reduces efflorescence on masonry surfaces.
• Allows water vapour transmission, enabling the substrate to breathe.
• Deep penetrating treatment that does not peel or erode.

• Protection of in-situ and precast concrete structures.
• Masonry walls and brickwork.
• Concrete facades and exterior surfaces.
• Structures exposed to water-borne salts and pollutants.
• Surface preparation before applying compatible solvent-based coatings.

• Type: Solvent-based silane siloxane primer.
• Appearance: Colourless, clear liquid.
• Finish: Invisible penetrating treatment.
• Chemical Base: Silane siloxane in hydrocarbon solvent carrier.
• Specific Gravity @ 20°C: 0.85–0.90.
• Overcoating Time: Wet-on-wet application.
• Dry Film Thickness: Penetrating impregnate (no measurable film build).
• Coverage: 3–6 m²/kg/coat depending on substrate porosity.
• Recommended Coats: Minimum 2 coats.
• Application Method: Brush or low-pressure spray.
• Shelf Life: 12 months in unopened packaging.
• Storage: Store in a cool, dry place away from direct sunlight.

Step 1: Ensure the substrate is fully cured, clean, and free from dirt, grease, oil, curing compounds, laitance, and previous coatings.

Step 2: Remove contaminants using suitable surface preparation methods such as grit blasting or sand blasting.

Step 3: Allow the surface to dry completely. Slightly damp surfaces may be treated, but no wet spots should be present.

Step 4: Stir UPGRADE SupraPhobic thoroughly before use. Do not dilute with water or solvents.

Step 5: Apply the first coat using a low-pressure spray or brush, ensuring complete surface saturation.

Step 6: On vertical surfaces, begin application from the bottom and work upwards.

Step 7: Apply the second coat immediately using the wet-on-wet method.

Step 8: Allow the treatment to react and penetrate fully. Avoid application in direct sunlight and ensure adequate ventilation during use.

Upgrade Enterprises Private Limited
Plot Nos. SA-31, 32, 40 & 41,
Cuncolim Industrial Estate,
Cuncolim, Salcete, South Goa,
Goa – 403703, India.