UPGRADE UNO

. Excellent corrosion and rust protection.

. Direct application on metal surfaces without separate priming.

. Fast drying, allowing two coats in a single working day.

. Strong adhesion to mild steel surfaces.

. Suitable for both indoor and outdoor applications.

. Protection of mild steel structures.

. Metal fabrication and industrial equipment.

. Steel gates, grills, and railings.

. Interior and exterior metal surfaces.

. Anti-rust coating before enamel paint application.

. Product Type: Single Component 1K Epoxy Primer.

. Appearance: Black.

. Chemical Base: Epoxy Resin.

. Viscosity at 30°C: 250 cPs.

. Coverage for 2 Coats: Approximately 0.2 kg/m².

. Self-Priming: Yes.

. Direct-to-Metal Application: Yes.

. Drying Time Between Coats: 6–8 hours.

. Recommended Spray Thinner Addition: 2–5% maximum.

. Suitable for Interior and Exterior Use.

Step 1: Prepare the metal surface by removing rust, dirt, oil, grease, and other contaminants.

Step 2: For previously painted surfaces, scrape off old paint and remove loose particles.

Step 3: Clean the surface using a wire brush or sandpaper (No. 150/180) to obtain a smooth and sound substrate.

Step 4: Ensure the surface is completely clean and dry before application.

Step 5: Stir the product thoroughly before use.

Step 6: Apply the first coat of UPGRADE UNO using a brush, roller, or spray equipment.

Step 7: Allow the first coat to dry for 6–8 hours.

Step 8: Apply the second coat of UPGRADE UNO.

Step 9: Once fully dried, apply the desired enamel paint topcoat for enhanced protection and finish.

Upgrade Enterprises Private Limited
Plot Nos. SA-31, 32, 40 & 41,
Cuncolim Industrial Estate,
Cuncolim, Salcete, South Goa,
Goa – 403703, India.